Removing The Right Door - Canon iR4570 Series Service Manual

Chapter 10
F-10-183
Attaching the Right Door
1) Match the hinge [1] found at the bottom of the right
door against the lug.
2) Engage the hinge [2] found on the top of the right
door with the hook found on the side plate.
F-10-184
When tightening the 2 screws used to fix the hinge in
place, be sure to close the right door first.
10.5.12.14 Removing the Right
Door
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
10-56
1) Open the right door.
2) Remove the screw [1], and detach the fixing plate
[2].
3) Remove the joint shaft [1], and free the extension
delivery unit [2] from the right door.
4) Disconnect the connector [1], and remove the reuse
band [2]; then, remove the 2 screws (M4x8; RS
tightening).
0007-8416
F-10-185
F-10-186
F-10-187