Canon iR4570 Series Service Manual page 922

Sub-item
PCL-COPY Supporting the PCL command [COPIES Meru/Pinatubo/Hood]
<Setting range>
0: Control each page according to the command of the COPIES
command specified to the page [Default]
1: Meru/Pinatubo/Hood compatible mode
2 to 65535: Reserved
PRJOB-CP Setting the CCV count pulse at reception and report output
<Setting range>
0: Do not output count pulse [Default]
1: Output count pulse
DPT-ID-7 Registering the department ID and entering 7 digits for
authentication
<Setting range>
0: Conventional [Default]
1: 7-digit input
RUI-RJT Disconnecting the HTTP port from RUI by three authentication
failures
<Setting procedure>
0: Invalid [Default]
1: Valid
CTM-S06 Setting whether or not to erase the password from the export file of
the file send address
<Setting range>
0: Do not erase the password from the export file. [Default]
1: Erase the password from the export file.
CTM-S07 Setting whether or not to erase the RUI address display or the send
password source display on the edit screen
<Setting range>
0: Do not erase the send password source display on the edit screen.
[Default]
1: Erase the send password source display on the edit screen.
FREG-SW Setting whether or not to display the free section of the MEAP
counter (SEND)
<Setting range>
0: Do not display [Default]
1: Display
COPIER > OPTION >USER
Description Level
2
2
2
2
2
2
2