Canon iR4570 Series Service Manual page 920

Sub-item
DOC-REM Setting whether or not to display the document removal message
<Setting range>
0: Do not display [Default 1]
1: Display
SIZE-DET Turning the document size detection function ON or OFF
<Setting range>
0: OFF (When the platen is opened, the user will not be dazzled
because the lamp does not light.)
1: ON [Default]
DATE-DSP Switching the date display format
<Setting range>
0: YYMM/DD
1: DD/MM/YY
2: MM/DD/YY
MB-CCV Limiting the mailbox control card user
<Setting range>
0: No [Default]
1: Yes
TRY-STP Setting output or no output in the tray full state
<Setting range>
0: Ordinary mode (Interrupt when the finisher tray is full) [Default]
1: Interrupt by height detection only
MF-LG-ST Setting the long mode key
<Setting range>
0: Ordinary [Default]
1: Display a long mode key on the corresponding mode screen
CNT-DISP Setting whether or not to display a serial number when the counter
confirmation key is pressed
<Setting range>
0: Display a serial number [Default]
1: Do not display a serial number
PH-D-SEL Setting the number of lines for printing in Photo mode
<Setting range>
0: 141 lines [Default]
1: 134 lines
COPIER > OPTION >USER
Description Level
1
2
2
2
2
2
2
2