Canon iR4570 Series Service Manual page 141

9) Connect the cable [1] of the machine and the relay cable [2] of the card reader.
10) While making sure that the harness will not be trapped, mount the card reader [1] using a TP screw (4x25) [3]
fitted with a washer [2].
11) Connect the power cable to the wall outlet, and turn on the main power switch. See that the machine is in a
standby state, and start service mode.
12) Make the following selections in the machine's service mode (COPIER>FUNCTION>INSTALL>CARD); then,
F-2-73
[1]
[2]
F-2-74
F-2-75
Chapter 2
2-31