Setting The Timer - Canon iR4570 Series Service Manual

Chapter 1
*Factory settings.
Mode
set time (fine)
set auto sleep time
auto reset time
set weekly timer

1.2.3.4 Setting the Timer

/ iR3530
*Factory default.
Mode
fine-tune time
auto sleep time:
auto clear time:
set weekly timer:
1.2.3.5 Adjustments and Cleaning
iR2270 / iR2870 / iR3570 / iR4570
*Factory settings.
**Indicated in the presence of a specific accessory.
***If iR4570, iR3570, iR2870, or iR2270, indicated in the presence of a specific accessory (if model F, standard).
Mode
zoom fine adjust
center bind staple edging**
(w/ saddle finisher)
1-44
T-1-29
Description
in 1-min increments (using +/-)
10, 15, 20, 30, 40, 50 min; *1 hr; 90 min, 2, 3, 4 hr
0: disable; 1, *2, ..., 9 min (in 1-min increments)
00:00 to 23:59 (in 1-min increments); everyday from Sun to Sat
T-1-30
Description
set date/time (12 numerals)
time zone: GMT - 12:00 ~ GMT + 12:00 - GMT + 9:00*
daylight saving: ON/OFF*
10 sec; 1.2*, 10, 15, 20, 30, 40, 50 min; 1 hr; 90 min; 2, 3, 4 hr
0= none; 1, *2, ..., 9 min (in 1-min increments)
between 00:00 and 23:59 from Sun to Sat (in 1-min increments)
T-1-31
Description
XY, individually: -1.0T to +1.0% (in 0.1% increments)/*0%
Start key
0009-2474
0007-3166