Canon iR4570 Series Service Manual page 908

Hide thumbs Also See for iR4570 Series:

Table of Contents

Switching thick-paper fixing temperature mode

0: OFF [Default]

1: Priority to productivity, control temperature fixed at -10deg C

2: Control temperature fixed at -6deg C

3: Control temperature fixed at -3deg C

4: Priority to fixing, control temperature fixed at +3deg C

5: Control temperature fixed at +6deg C

6: Control temperature fixed at +10deg C

7: Control temperature fixed at +15deg C

Improving the image quality in case of a drum charging fault

Note: This setting is cleared if APVC is executed with a new drum unit

or if a service mode (FUNCTION>D-GAMMA) is executed.

0: No UP [Default], 1: 50 mA UP, 2: 100 mA UP

Improving fixing (Increasing the fixing temperature)

Note: Valid for iR3570/3570F/4570/4570F only