Carbon Headset/Handset Straps; Beep Strap - Toshiba strata CT Installation & Maintenance Manual

Station Apparatus
Note
10. Reinstall the telephone base; secure with the four captive screws.
➤
To adjust the volume of the HESB Loud Ringing Bell
1.
2.

Carbon Headset/Handset Straps

If a carbon-type handset or headset is connected to the handset jack on the side of the
telephone, two jumper straps inside the telephone must be cut.
➤
To cut the straps
Note
See
H
1.
2.
3.

Beep Strap

A "beep" sounds whenever a dial pad or feature button is pressed on a digital telephone.
C
➤
To eliminate the beep sound
See
1.
2.
3.
5-14
If the HHEU PCB is removed from the phone, the HHEU strap must be replaced for
proper telephone operation.
Call the telephone connected to the HESB.
Adjust the volume control on the back of the HESB and the ring volume control on the
telephone.
You do not need to cut these straps if the headset is connected to the HHEU.
Figures 5-1 and 5-7~5-8
Loosen the four captive screws on the telephone base, and remove the base.
For 2000-series digital telephones, and cut the W201 and W202 carbon straps.
Reinstall the telephone base, and secure it with its four captive screws.
Figures 5-1 and 5-7~5-8
Loosen the four captive screws from the telephone base and remove the base.
Cut the beep strap.
Reinstall the telephone base, and secure it with its four captive screws.
and follow these steps:
and follow these steps:
Strata CT I&M Manual October 2000