Toshiba strata CT Installation & Maintenance Manual page 162

Station Apparatus
➤
To mount digital and electronic telephones
Figure 5-1
Refer to
H
1.
2.
3.
4.
C
5.
Figure 5-2
5-6
Handset Hanger
Removing the Telephone Base
Figures 5-1~5-2 and the following steps.
Loosen the captive screws, and remove the telephone base.
Using a suitable cutter, remove the handset hanger from the base.
Insert the handset hanger in the slot on the front of the phone. The hanger fits in the
notch on the handset cradle.
Rotate the telephone base 180 degrees and secure it to the telephone with its four captive
screws.
Connect the phone to the wall modular connector with a cord approximately four inches
long (available at most telephone supply companies).
Wall Mounting Base Rotation
Plastic Tab
1478
1480
Strata CT I&M Manual October 2000