External Page Options; External Page Option Installation - Toshiba strata CT Installation & Maintenance Manual

Peripheral Installation

External Page Options

Strata CT systems equipped with a PIOU, PIOUS, or PEPU PCB offer a variety of external
paging options, each of which includes a BGM option. The PIOU, PIOUS, or PEPU PCB
with the lowest Program 03 code (41, 42, or 43) is required to support these options:
N
N
N

External Page Option Installation

All paging connections are made via the PIOU or PEPU Amphenol connectors or the PIOUS
TB1 terminal to the Main Distribution Frame (MDF).
Paging (Single-zone) with BGM (Same Amplifier)
Paging and BGM are amplified by a common customer-supplied paging amplifier. When the
external page access code is dialled, the external page control relay is activated, which applies
a short (or opens the contacts) to the amplifier mute control to mute the music.
H
➤
To install External Page (single zone) with BGM (same amplifier)
1.
2.
3.
C
4.
5.
6-28
Paging with BGM (same amplifier) – available with PIOU, PIOUS, or PEPU
Zone Paging with BGM (separate amplifiers) – available with PIOU
Zone Paging with BGM (multiple amplifiers) – available with PIOU
Connect input 1 from the paging amplifier to pins 13 (SPR) and 38 (SPT) of the PIOU
or PEPU; or connect to SPT and SPR of the PIOUS
Connect the paging amplifier mute terminal to pins 7 and 32 of the PIOU or PEPU; or
connect to DET and DER of the PIOUS.
Connect the music source to input 2 of the paging amplifier.
Connect the speaker to the paging amplifier output.
Verify that the PIOU or PEPU P10 jumper plug is in the MAKE position or that the
PIOUS W1 jumper wire is in the MAKE position.
(see Figure 6-18).
Strata CT I&M Manual October 2000