External Options; Peku Configuration To Support An Hdss Console Option; Peku Installation; Peku Programming - Toshiba strata CT Installation & Maintenance Manual
Digital business telephone system
Hide thumbs
Also See for strata CT:
- System administrator manual (57 pages) ,
- User manual (54 pages) ,
- Manual (37 pages)
Table of Contents
Advertisement
Universal Slot PCBs
External Options
Note
PEKU Configuration to Support an HDSS Console Option
1.
2.
PEKU Configuration to Support Door Phone/Lock Control Unit (HDCB)
1.
2.
H
PEKU Installation
1.
2.
C
3.
PEKU Programming
Program 03: Door phones:
➤
➤
➤
➤
Note
Programs 28 and 29: HDSS console assignments.
Programs 77-1, 77-2, 79: HDCB and door phone ringing assignments.
3-10
Refer to
Chapter 5 – Station Apparatus
installation of electronic telephones (including the following upgrades: HVSU2 or
HVSU, HVSI for Off-hook Call Announce and HHEU for headset and/or loud
ringing bell interface) and external options, respectively.
Set the SW1 switch to DSS.
See
"HDSS Console"
on
console requires dedicated use of circuits 7 and 8 of a particular PEKU PCB.
Cut the W9 Door Phone jumper wire on the PEKU PCB.
Refer to
"Door Phone (MDFB) Installation"
Phones (MDFBs) and door lock control installation procedures. Only circuit 5 of a
PEKU associated with ports 004, 012, 020, and 028 can support HDCBs.
Make sure the PEKU has been configured for the appropriate hardware options. See
previous pages for more information.
Insert the PEKU (component side facing right) into the appropriate slot, and apply firm,
even pressure to ensure proper mating of connectors.
After installing the PEKU, gently pull the PCB outward. If the connectors are properly
mated, a slight resistance will be felt.
Specify Code 21 to indicate a non-optioned station line PEKU.
Specify Code 22 to indicate a PEKU configured for Speaker OCA.
Specify Code 23 to indicate a PEKU configured for an HDSS console.
Specify Code 24 to indicate a PEKU configured for Speaker OCA and an HDSS
console.
If there are no PEKU options, Program 03 can be skipped, and Program 91 can be
run instead.
and
Chapter 6 – Peripheral Installation
Page 5-22
for console installation instructions. Each HDSS
on
Page 5-25
for HDCB, associated Door
Strata CT I&M Manual October 2000
for
Advertisement
Table of Contents
