CHAPTER 1: SPECIFICATIONS
1.6.4
Updating through the Enervista Software
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
Once the upgrade is started, the terminal emulation firmware will ask for the installation
file location.
Indicate the file location to begin the file transfer.
Make sure the Xmodem protocol is also selected in this file location
dialog window.
In some operating systems it maybe necessary to select the transfer option.
In this case,
Return to the HyperTerminal window used in step 5.
Select the Transfer > Send File menu item.
As shown below, enter the location of the new firmware file.
Select the Xmodem protocol.
Select the Send button and to begin the file transfer.
Once the file transfer is completed reboot the switch with the
command or by cycling power.
Login to the switch and use the
upload the configuration file (if necessary).
Use the following procedure to install the EnerVista Secure Web Management software.
Download the latest MultiLink firmware from the GE Multilin web site.
ML810 FIRMWARE UPDATES
show version
command to verify and
reboot
1–23