GE Multilink ML810 Instruction Manual page 44

APPLICATIONS
2–8
Example 3: In another application in an industrial environment, a 12 port Nebs compliant,
24VDC managed switch is required to meet the fiber and copper connections to cover the
wider area of video CCTV. The switch must be SNMP enabled and managed to easily
monitor the whole setup.
The Multilink ML810 managed edge switch easily qualifies for this requirement with the
various features and modularity it has. Loaded with MultiLink ML810 Managed Edge Switch
firmware, the edge switch provides a very effective and economical solution for the video -
vignette environment.
The security features (e.g. port-security, VLANs, SNMPv3, secure telnet, etc.) also boost the
Multilink managed switches to provide a very effective and reliable solution. The
modularity feature to support both copper and fiber at either 10/100/1000Mb speeds
easily meets the various speeds of legacy and future broadband requirements.
In a fast growing secure video environment, the ML810 is a reliable and secure solution.
The modular design of the Multilink ML810, provides a wide range of copper/fiber options
to meet requirements. The Gigabit uplink for storage or broadband uplink allows the
telecom user a very effective solution to store their sensitive data securelyFig 2.5c Multilink
ML810 deployed in a video security CCTV application for monitoring and securing the
premises.
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
CHAPTER 2: INTRODUCTION