Exiting - GE Multilink ML810 Instruction Manual

CHAPTER 1: SPECIFICATIONS

1.4.10 Exiting

MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
In the following example, the <TAB> key completes the command:
ML810>
se<TAB>
password
timeout
vlan
ML810>
set
To exit from the CLI interface and terminate the console session use the
command. This command prompts to ensure that the logout was not mistakenly typed.
The following syntax applies:
logout
The following example illustrates logging out from a session:
ML810>
logout
Logging out from the current session ['Y' or 'N']
Connection to the host lost
COMMAND LINE INTERFACE FIRMWARE
logout
Y
1–15