GE Multilink ML810 Instruction Manual page 242

CONFIGURING QOS WITH ENERVISTA SECURE WEB MANAGEMENT SOFTWARE
14–12
In the following window, a ToS is enabled on Port 5. As before, only the ToS level settings
are relevant.
Note that the different settings are clear from the window below. Port 1 has port-based
QoS, port 3 has tag-based QoS, and port 5 is using ToS.
 After all changes are made, save the changes using the save icon
( ).
CHAPTER 14: QUALITY OF SERVICE
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL