PORT MIRRORING USING ENERVISTA SECURE WEB MANAGEMENT SOFTWARE
9.4.2
Port Setup
9–12
Make sure the Mirror Status is also set to enabled for mirroring:
For security reasons, GE Digital Energy recommends that the port mirroring be disabled
using the Edit button and setting the Mirror Status to off once port monitoring is
completed.
Note that:
1.
Only one port can be set to port mirror at a time.
2.
Both the ports (monitored port and mirrored port) have to belong to the same
VLAN.
3.
The mirrored port shows both incoming as well as outgoing traffic.
With the ML810, the specific characteristics of each port can be individually programmed.
CHAPTER 9: PORT MIRRORING AND SETUP
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL