CHAPTER 1: SPECIFICATIONS
1.5.4
Modifying the Privilege Level
1.5.5
Help
1.5.6
Exiting
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
Privilege levels cannot be changed from the EnerVista Secure Web Management (SWM)
firmware. This can only be done through the CLI interface, or alternately, by deleting the
user and adding the same user with the proper privilege level.
Help for the EnerVista Secure Web Management software can be obtained by clicking on
the Help icon as shown below.
To exit or logout, click on the logout button.
Confirm the logout by selecting OK in the pop-up window.
ENERVISTA SECURE WEB MANAGEMENT
1–21