GE Multilink ML810 Instruction Manual page 274

E-MAIL
Example 17-1: Configuring SMTP to receive SNMP trap information via e-mail
ML810#smtp
ML810(smtp)##server ip=3.94.210.25 port=25 retry=3 domain=ge.com
Successfully set global SMTP server configuration
ML810(smtp)##show smtp config
SMTP Global Configuration
========================================
Status : Disabled
SMTP Server Host : 3.94.210.25
SMTP Server Domain : ge.com
SMTP Server Port : 25
Retry Count
ML810(smtp)##add id=1 email=jsmith@ge.com traps=s events=CF
Recipient successfully added
ML810(smtp)##add id=2 email=xyz@abc.com traps=all events=all ip=3.30.154.28 port=25
domain=abc.com
Recipient successfully added
ML810(smtp)##show smtp recipients
ID E-mail Address SMTP Server From Domain Port Traps Events
===================================================================
1 jsmith@ge.com 3.94.210.25
2 xyz@abc.com 3.30.154.28
3 -- --
4 -- --
5 -- --
ML810(smtp)##delete id=2
Recipient successfully deleted
ML810(smtp)##show smtp recipients
ML810(smtp)##show smtp recipients
ID E-mail Address SMTP Server From Domain Port Traps Events
===================================================================
1 jsmith@ge.com 3.94.210.25
2 -- --
3 -- --
17–4
: 3
ge.com
abc.com
-- -- -- --
-- -- -- --
-- -- -- --
ge.com
-- -- -- --
-- -- -- --
CHAPTER 17: MISCELLANEOUS COMMANDS
25 S FC
25 All All
25 S FC
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL