Locating Multilink Ml810 Switches - GE Multilink ML810 Instruction Manual

LOCATING MULTILINK ML810 SWITCHES

3–2
3.1 Locating Multilink ML810 Switches
• For vertical DIN-Rail mounting, see Section 3.3
• For vertical panel mounting and wall mounting, see Section 3.3.1
• For DC power input data, see Appendix B. For Dual Source, see Appendix C.
The rugged metal case of the Multilink ML810 will normally protect it from accidental
damage in a lab or workplace setting. Maintain an open view of the front to visually
monitor the status LEDs. Keep an open area around the unit so that cooling can occur
from convection while the unit is in operation. The ML810 has no fans, so it is silent when in
operation. Internal electronics use the case as a heat sink, so the unit may normally be
quite warm to the touch.
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
CHAPTER 3: INSTALLATION