Software Installation; Vi. Software Installation - GE 97845 Instruction Manual

VI.

Software Installation

Software installation is only required for
Windows 98 and 98 SE users. Users of
®
all other Operating Systems, including
Windows 2000, VISTA, XP and any
®
Mac OS, may skip this section.
®
1) Connect the hub to your computer.
2) Windows
hub and automatically run the "Add New
Hardware Wizard".
3) When the initial screen appears introducing
the "Add New Hardware Wizard", click Next.
4) Select "Search for the best driver for your
device (Recommended): and click Next.
5) When asked to select a location to search for
the drivers, use the default selection. Do not
change the location. Click Next.
6) Click Next to accept the location the driver
will be installed in.
7) On the fi nal screen notifying you that the
driver has been installed, click Finish.
98 and 98 SE will detect the
®
9