Example - GE Multilink ML810 Instruction Manual

CHAPTER 17: MISCELLANEOUS COMMANDS

17.1.3 Example

Note
NOTE
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
The command customizes (and also sends a test e-mail to check SMTP settings)
sendmail
the e-mail delivered by specifying the e-mail subject field, server address, to field and the
body of the text. See the example in this section for details.
sendmail server=<ip-addr> to=<email-addr> from=<email-addr> subject=<string>
body=<string>
The command configures the global SMTP server settings.
server
server ip=<ip-addr> [port=<1-65535>] [retry=<0-3>] [domain=<domain>]
For this command, represents the SMTP server IP address,
ip
for SMTP communications (default is 25), and
error occurs when sending e-mail (from 0 to 3 with default of 0).
The parameter specifies the domain name of the SMTP server.
optional domain
The following example shows how to set SMTP to receive SNMP trap information via e-mail.
E-mail alerts can be forwarded to be received by other devices such as cellphones and
pages. Most interfaces to SMTP are already provided by the service provider.
the TCP port to be used
port
specifies how many times to retry if an
retry
E-MAIL
17–3