GE Multilink ML810 Instruction Manual page 185

CHAPTER 10: VLAN
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
CONFIGURING TAG VLANS WITH ENERVISTA SECURE WEB MANAGEMENT SOFTWARE
 After adding the ports and defining the VLAN, click OK.
 Click on Port Settings in the Configuration >VLAN >Tag-Based
menu and enable the tagging for each port..
 Repeat the last two steps for each of the ports and each of the
VLANs (click on port settings and enable the tag on the port.)
After all the ports are tagged, the tagged column should change to
"Yes" for all VLANs
To check the status of the tagging,
10–21