GE Multilink ML810 Instruction Manual page 267

CHAPTER 16: SNMP
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
CONFIGURING SNMP WITH ENERVISTA SECURE WEB MANAGEMENT SOFTWARE
 When done adding stations, click OK.
 When adding SNMP trap receivers, click on the Add button on the
SNMP menu screen.
 Make sure that each station can be pinged from the switch by using
the Administration > Ping menu.
 Determine which sorts of traps each station will receive, as shown
above. If not sure, select all three types.
 When done adding trap receivers, click OK.
16–13