GE Multilink ML810 Instruction Manual page 174

CONFIGURING PORT VLANS WITH ENERVISTA SECURE WEB MANAGEMENT SOFTWARE
10–10
After adding the VLAN, the VLAN is not active. Activating the VLAN has to be done
manually.
 To activate the VLAN, click on the Status button.
 Select VLAN ID.
 Select VLAN Status: Start .
A specific VLAN can be activated or all VLANs can be activated (or disabled).
 Click OK to activate VLAN..
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
CHAPTER 10: VLAN