GE Multilink ML810 Instruction Manual page 119

CHAPTER 6: ACCESS CONSIDERATIONS
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
CONFIGURING PORT SECURITY THROUGH THE COMMAND LINE INTERFACE
In Example 6-7, any computer on 3.94.245.10 network is allowed (note how the subnet
mask indicates this). Also, a specific station with IP address 3.94.245.25 is allowed (again
note how the subnet mask is used). An older station with IP address 3.94.245.15 is
removed.
Example 6-7: Allowing/blocking specific IP addresses
ML810#
access
ML810(access)##
allow ip=3.94.245.10 mask=255.255.255.0 service=tel
Service(s) allowed for specified address
ML810(access)##
allow ip=3.94.245.25 mask=255.255.255.255 service=t
Service(s) allowed for specified address
ML810(access)##
remove ip=3.94.245.15 mask=255.255.255.255
Access entry removed
ML810(access)##
exit
ML810#
show ip-access
============================================================
IP Address | Mask
============================================================
3.94.245.10 255.255.255.0
| Telnet | Web | SNMP |
ALLOWED DENIED DENIED
6–11