Powering The Multilink Ml810 Managed Edge Switch - GE Multilink ML810 Instruction Manual

POWERING THE MULTILINK ML810 MANAGED EDGE SWITCH

3–10
3.4 Powering the Multilink ML810 Managed Edge Switch
The DC internal power supply supports installation environments where the DC voltage is
from 10 to 300 volts depending on the model selected. The power consumption will range
from about 10 up to 15 watts, depending on the port quantity and types in the
configuration.. When connecting the Ethernet cabling, there is no need to power down the
unit. Individual cable segments can be connected or disconnected without concern for
power-related problems or damage to the unit.
Power input options are available to suit the ML810 Switches to special high-availability
communications and/or heavy industrial-grade applications, including:
• 12VDC, -48VDC, 24VDC, 125VDC and 250VDC with single DC input,
• 12VDC, -48VDC, 24VDC, 125VDC and 250VDC with dual-source DC input
• AC input with internal power supply
(See Section 1.2, for Ordering Information.)
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
CHAPTER 3: INSTALLATION