GE Multilink ML810 Instruction Manual page 14

Managed edge switch
Hide thumbs Also See for Multilink ML810:
Table of Contents

Advertisement

TECHNICAL SPECIFICATIONS
Ringwave Surge
Conducted RF Immunity (0 to
150 kHz)
Radiated & Conducted EmissionsCISPR22
Radiated & Conducted EmissionsFCC Part 15 Subpart B
Safety
High Relative Humidity,
Temperature, and High I/P
Voltage
Low Relative Humidity,
Temperature, and High I/P
Voltage
CE Compliance
North America
1–4
APPROVALS
IEC
FCC
ISO
UL listed (UL60950), cUL, CE, Emissions meet FCC Part 15 Class A
NEBS Level 3 and ETSI Compliant
IEEE 1613 Class 2 Environmental Standard for Electric Power Substations
See also Note for Power Substations in Section 3.2.1, 3.6.1, and 5.1.2
IEC 61850 EMC and Operating Conditions Class C for Power Substations
NEMA TS-2 and TEES for DC-powered and PoE-powered traffic control equipment
WARRANTY:
Three years, per UL 60950 temperature rating. Made in USA
IEC61000-4-12
IEC61000-4-16
EN60950-1
NEMA TS2 2.2.7.5
NEMA TS2 2.2.7.6
Applicable Council Directive
Low voltage directive
EMC Directive
cULus
EMC - Communication networks
and systems in substations
Manufactured under a registered
quality program
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
CHAPTER 1: SPECIFICATIONS
Level 4
Level 3
Class A
Class A & B
standard
74°C @ 85% RH / low
voltage
74°C @ 18% RH / low
voltage
According to
EN60950-1
EN61000-6-2, EN61000-6-4
UL60950-1
C22.2 No. 60950-1
IEC61850-3
FCC part 15 subpart B Class
A & B
ISO9001

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents