Description - GE Multilink ML810 Instruction Manual

GE Energy
9.1.1

Description

MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
Multilink ML810
Ethernet Communications Switch
Chapter 9: Port Mirroring and
Port Mirroring and Setup
9.1 Port Mirroring
This section explains how individual characteristics of a port on a MultiLink ML810
Managed Edge Switch is configured. For monitoring a specific port, the traffic on a port
can be mirrored on another port and viewed by protocol analyzers. Other setup includes
automatically setting up broadcast storm prevention thresholds.
An Ethernet switch sends traffic from one port to another port. Unlike a switch, a hub or a
shared network device, the traffic is "broadcast" on each and every port. Capturing traffic
for protocol analysis or intrusion analysis can be impossible on a switch unless all the
traffic from a specific port is "reflected" on another port, typically a monitoring port. The
MultiLink ML810 Managed Edge Switch can be instructed to repeat the traffic from one
port onto another port. This process - when traffic from one port is reflecting to another
port - is called port mirroring. The monitoring port is also called a "sniffing" port. Port
monitoring becomes critical for trouble shooting as well as for intrusion detection.
9–1