Updating Through The Enervista Software - GE MULTILINK ML2400 Instruction Manual

CHAPTER 1: INTRODUCTION
1.7.4

Updating through the enervista Software

MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
Refer to Saving Configuration on page 5–19 for details on the
Once the upgrade is started, the terminal emulation firmware will ask for the installation
file location.
Indicate the file location to begin the file transfer.
Make sure the Xmodem protocol is also selected in this file location
dialog window.
In some operating systems it maybe necessary to select the transfer option.
In this case,
Return to the HyperTerminal window used in step 5.
Select the Transfer > Send File menu item.
As shown below, enter the location of the new firmware file.
Select the Xmodem protocol.
Select the Send button and to begin the file transfer.
Once the file transfer is completed reboot the switch with the
reboot
Login to the switch and use the
and upload the configuration file (if necessary).
Use the following procedure to install the EnerVista Secure Web Management software.
Download the latest MultiLink firmware from the GE Multilin web
site.
Save this file on FTP or TFTP. Ensure the FTP or TFTP path is
configured. If using FTP, record the FTP login name and password.
command or by cycling power.
show version
INTRODUCTION
command.
xmodem
command to verify
1–25