Configuring Port Security With Enervista Software; Commands - GE Multilink ML810 Instruction Manual

CONFIGURING PORT SECURITY WITH ENERVISTA SOFTWARE

6.3.1

Commands

6–12
6.3 Configuring Port Security with EnerVista Software
After enabling the EnerVista Secure Web Management software,
 Select the Configuration > Port > Security menu item to configure
port security as shown below.
From the menu shown above, each individual port can be configured for the proper action
on the port, auto learn MAC addresses and specify individual MAC addresses.
 To edit each port, click on the edit icon (
 To enable or disable port security, use the Status drop down menu
as shown below.
CHAPTER 6: ACCESS CONSIDERATIONS
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
).