GE Multilink ML810 Instruction Manual page 204

CONFIGURING STP
Example 12-4: Configuring STP parameters
ML810(stp)##show stp config
STP CONFIGURATION
-----------------
Spanning Tree Enabled(Global) : NO
Spanning Tree Enabled(Ports) : YES, 1,2,3,4,5,6,7
Protocol : Normal STP
Bridge ID : 80:00:00:20:06:2b:e1:54
Bridge Priority
Bridge Forward Delay
Bridge Hello Time
Bridge Max Age
Root Port : 0
Root Path Cost
Designated Root
Designated Root Priority
Root Bridge Forward Delay
Root Bridge Hello Time
Root Bridge Max Age
ML810(stp)##show stp ports
STP Port Configuration
-------------------------------------------------------------------------------
Port# Type Priority Path Cost State Des. Bridge
12–8
: 32768
: 15
: 2
: 20
: 0
: 80:00:00:20:06:2b:e1:54
: 32768
: 15
: 2
: 20
CHAPTER 12: SPANNING TREE PROTOCOL (STP)
Des. Port
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL