Cannot Cut Paper - Canon iPF6300 User Manual

Cannot cut paper.

Cause
There are sheets left on the
Ejection Guide.
There is a foreign object by
the Output Tray, obstruct-
ing the Cutter Unit.
You are not using the print-
er under the recommended
environmental conditions
for the paper.
You are using paper that is
not compatible with auto-
matic cutting.
In other cases, the Cutter
Unit may be damaged.
End of paper feed.
You are pressing the ▲ button on the Control Panel and trying to rewind the roll to the
edge.
Borderless printng not possible.
Cause
The print job received specifies
a type or width of paper that is
not compatible with borderless
printing.
iPF6300
1.
Press the OK button and remove the paper.
2. Load paper.
3.
If "Not finished printing. Finish printing remaining jobs?" is shown on the
Display Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
1. Lift the Top Cover and remove the foreign object.
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the
Display Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
Use the printer only where the recommended environmental conditions for the paper
are met. Note that various environmental conditions are recommended for various
types of paper. For details on the recommended environmental conditions, see the
Paper Reference Guide.
(See "Types of Paper.")
→P.665
1.
Specify Manual as the cutting method and use scissors or a cutting tool to cut the
roll.
(See "Specifying the Cutting Method for Rolls.")
For information about paper that is compatible with automatic cutting, see the Pa-
per Reference Guide.
(See "Types of Paper.")
2.
Press the OK button and remove the paper.
Contact your Canon dealer for assistance.
Cause
Follow these steps to change the settings of the print job to enable borderless
printing.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Make sure the correct printer driver for the printer is selected and try printing
again.
For information on types of paper compatible with borderless printing, refer
to the Paper Reference Guide.
(See "Types of Paper.")
Select None when you have set Detect Mismatch on the control panel to
Warning.
However, note that this error may cause paper jams and affect the printing qual-
ity.
Error Message > Messages regarding paper
Corrective Action
→P.674
→P.686
→P.665
Corrective Action
→P.665
>
Corrective Action
Release the ▲ button.
Cannot cut paper.
12
919