Printing In Ideal Colors For Light In The Viewing Environment - Canon iPF6300 User Manual

Adjustments for Better Print Quality
• Loading Sheets in the Feed Slot
2.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (
3.
Press the OK button.
The Set./Adj. Menu is displayed.
4.
Press ▲ or ▼ to select Adjust Printer, and then press the OK button.
5.
Press ▲ or ▼ to select Calibration, and then press the OK button.
6.
Press ▲ or ▼ to select Auto Adjust, and then press the OK button.
7
The printer now measures environmental conditions, checks the paper, and prints a test pattern for color calibra-
tion. The printer automatically reads the test pattern and sets the adjustment value.

Printing in Ideal Colors for Light in the Viewing Environment

You can print in the colors that look best when viewed under the light where the printed image will be displayed.
There are two ways to adjust the color tone for the ambient light, as follows.
By selecting color tones on Chart before printing
On the printed Chart, note the number of the set of colors with the desired color tone and enter this number in the
printer driver before printing.
Important
• This function is only supported in Windows and Mac OS X 10.4 or later.
• The colors in this function may differ slightly depending on the system software used (Windows 32/64
bit or Macintosh).
For instructions on selecting color tones on Chart before printing, refer to the following topic:
730
• Selecting Color Tones on Charts Before Printing (Windows)
• Selecting Color Tones on Charts Before Printing (Mac OS X)
Printing in Colors Matching the Measured Ambient Light
Measure the light level in the viewing environment and enter the results in the printer driver before printing.
Printing in Ideal Colors for Light in the Viewing Environment
> Color adjustment
Note
• If the Tab Selection screen is not displayed, press the Menu button.
>
→P.696
→P.731
→P.735
).
iPF6300