Borderless Printing By Resizing Originals To Fit The Roll Width (Windows) - Canon iPF6300 User Manual

Enhanced Printing Options

Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)

This topic describes how to enlarge originals before borderless printing to match the roll width, based on the following
example.
If you use an A1 or A2 roll for borderless printing, insert the provided Spacer for Borderless Printing on the Roll Hold-
er.(See " Loading Rolls on the Roll Holder
If you do not attach the Spacer for Borderless Printing, the Platen may be soiled from borderless printing.
• Document: Any type
• Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
• Paper: Roll
• Paper type: Heavyweight Coated Paper
• Roll paper width: 10 inches (254.0 mm)
1.
In the application, create an original that takes up the entire space of the paper size.
3
2.
Choose Print in the application menu.
3.
Select the printer in the dialog box, and then display the printer driver dialog box.(See " Accessing the Printer
Driver Dialog Box from Applications (Windows)
4.
Make sure the Main sheet is displayed.
98
5.
A
In the
6.
Select the print target in the
Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)
> Borderless Printing
Note
• If you can specify the margin, as in Microsoft Word, set the margin at 0 mm. For instructions on
specifying the margin, refer to the software documentation.
Media Type list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper.
E
Print Target list.
>
")
→P.671
")
→P.192
iPF6300