Canon iPF6300 User Manual page 801

Inter- TCP/ IPv6
face IP
Setup
Net- NetWare
Ware
Frame Type
Print Service
AppleTalk
Ether- Auto Detect
net
Driver
Comm.Mode
Ethernet Type
Spanning Tree
MAC Address
Interface Print
Return Defaults
Sys- Sleep Timer
tem
Setup
Buzzer
Contrast Adj.
Date Date
&
Time
Time
Date Format
Language
Time Zone
Length Unit
Detect Mismatch
iPF6300
Setting Item
DNS
Pri. DNS
Set-
SrvAddr
tings
Sec. DNS
SrvAddr
DNS Host Name
DNS Domain
Name
Printer Parts
Description, Instructions
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify the NetWare protocol. To apply your
changes, choose Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To
apply your changes, choose Register Setting.
Specify the communication method. To apply your
changes, choose Register Setting.
Choose On for automatic configuration of the LAN
communication protocol. Choose Off to use set-
tings values of Comm.Mode and Ethernet Type.
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are suppor-
ted over the LAN.
Indicates the MAC address.
Print interface settings information.
Choose OK to restore Interface Setup settings to
the default values.
Specify the period before the printer enters sleep
mode.
Choose On for the buzzer to sound once for warn-
ings and three times for errors.
Adjust the Display Screen contrast level.
Set the current date.
Set the current time. Available only if the Date set-
ting is specified.
Specify the date format.
Specify the language used on the Display Screen.
Specify the time zone. Time zone options indicate a
main city in this time zone and the difference from
Greenwich Mean Time.
Choose the display unit for length. Change the unit
displayed for the remaining amount of roll paper,
Tot.Print Area, and so on.
Specify printing behavior if the type and size of pa-
per specified in the printer menu does not match
the type and size in the printer driver.
> Control Panel >
8
785
Menu Settings