To Start From Microsoft Powerpoint - Canon iPF6300 User Manual

Windows Software
7.
Click OK if the message is displayed.
8.
Edit and create the document.
4
Important
• The layout may collapse if you create a form using existing data. If that is the case, modify the data
again.

To start from Microsoft PowerPoint

Below are the steps to start Print Plug-In for Office from Microsoft PowerPoint.
1.
Start Microsoft PowerPoint.
2.
If Start imagePROGRAF Print Plug-In is displayed on the toolbar/ribbon, click it.
364
3.
Check that the imagePROGRAF Print Plug-In toolbar/ribbon is displayed.
4.
Click the buttons on the toolbar/ribbon according to the items you want to set.
To start from Microsoft PowerPoint
> Print Plug-In for Office >
Note
• Printing is done in Print Matching Roll Width of the Printing Wizard. For details on Print
Matching Roll Width, refer to see "Print Matching Roll Width (Word)."
Important
• If the imagePROGRAF Print Plug-In toolbar/ribbon is not displayed, refer to the following.
• When Print Plug-In for Office is not displayed
→P.352
→P.347
.
iPF6300