Network Environment - Canon iPF6300 User Manual

Network Setting
• Windows 7 x64
• Mac OS X 10.3.9 or later
• Printing over an AppleTalk network
• Compatible operating systems
• Mac OS X 10.2.8–10.4
• Compatible computer
• A computer that runs one of the above operating systems
• Printing over a NetWare network
• Compatible servers
• Novell NetWare 4.2/5.1/6.0
9
• Compatible clients
• Windows 2000 (Professional or Server)
• Windows XP (Professional)
• Compatible computer
• A computer that runs one of the above operating systems

Network Environment

After confirming what type of network environment you will connect the printer to, set up the printer and computers as
needed.
806
Network Environment
> Network Setting >
Note
• When using IPv6, you must specify IPv6 on the Control Panel or in RemoteUI. For instructions, see
"Configuring TCP/IPv6 Network Settings."
Network Settings."
→P.812
• The imagePROGRAF printer driver is supported in Mac OS X 10.3.9 or later.
• The imagePROGRAF printer driver is not compatible with Unix.
Note
• The printer cannot be used over a LocalTalk network.
• Compatible with EtherTalk Phase 2.
• The imagePROGRAF printer driver is not compatible with AppleTalk.
Note
• In NetWare 6.0, iPrint is not supported.
or see "Configuring the Printer's TCP/IP
→P.811
iPF6300