Remove the roll from the Roll Holder.
Remove any attachments as follows.
• 3-Inch Paper Core Attachment
Spread the tips (b) of the 3-Inch Paper Core Attachment that protrude by the triangular label (a) of the Roll
Holder as shown and remove the 3-Inch Paper Core Attachment.
• Spacer for Borderless Printing
Remove the Spacer for Borderless Printing from the Roll Holder as shown.
• Store the roll in the original bag or box, away from high temperature, humidity, and direct sunlight. If
paper is not stored properly, the printing surface may become scratched, which may affect the printing
quality when you use it again.
Removing Rolls From the Roll Holder