Cannot Feed Paper; Cannot Cut Paper - Canon ipf8300 User Manual

Error Message >

Cannot feed paper.

Cause
A paper jam oc-
curred in the print-
er during printing.

Cannot cut paper.

There are sheets left on the
Ejection Guide.
There is a foreign object by
the Output Tray, obstruct-
ing the Cutter Unit.
You are not using the print-
13
er under the recommended
environmental conditions
for the paper.
You are using paper that is
not compatible with auto-
matic cutting.
1090
In other cases, the Cutter
Unit may be damaged.
Cannot feed paper.
Downloaded from ManualsPrinter.com Manuals
Messages regarding paper >
1. Lift the Release Lever and remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
2. Load paper.
3. Lower the Release Lever.
4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
Cause
1. Lift the Release Lever and remove the paper.
2. Load paper.
3. Lower the Release Lever.
4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-
play Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
1. Lift the Top Cover and remove the foreign object.
2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-
play Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
Use the printer only where the recommended environmental conditions for the paper are
met. Note that various environmental conditions are recommended for various types of
paper. For details on the recommended environmental conditions, see the Paper Refer-
ence Guide.
(See "Types of Paper.")
1. Specify Manual as the cutting method and use scissors or a cutting tool to cut the
roll.
(See "Specifying the Cutting Method for Rolls.")
For information about paper that is compatible with automatic cutting, see the Paper
Reference Guide.
(See "Types of Paper.")
2. Lift the Release Lever and remove the paper.
Contact your Canon dealer for assistance.
Corrective Action
→P.1043
→P.1047
→P.777
→P.802
Corrective Action
→P.777
→P.768
→P.794
→P.768
iPF8300