Specifying The Printer's Frame Type - Canon iPF6300 User Manual

Item
Context Name
Print Server
Name
Print Server
Password
Polling Interval
NPrinter Print Server
Name
Printer Number
7.
Click OK to display the Network page.

Specifying the Printer's Frame Type

To enable communication between the printer and computers on your network, specify the Ethernet frame type in your
NetWare environment.
Follow these steps to specify the frame type by using imagePROGRAF Device Setup Utility or the printer Control Pan-
el.
Note
• You can specify the frame type by using RemoteUI if the printer's IP address is configured.
Important
• Before specifying the frame type, make sure the printer is on and connected to the network.
• For instructions on installing imagePROGRAF Device Setup Utility, see "Installing imagePROGRAF
Device Setup Utility."
Specifying the frame type using imagePROGRAF Device Setup Utility
1.
Start imagePROGRAF Device Setup Utility.
2.
In the list of printers, select the printer to configure.
3.
Choose Protocol Settings from the Printer menu.
iPF6300
Specify the name of a context that has a NetWare print server.
(0–255 characters)
Specify the name of a NetWare print server.
(0–64 characters)
Set a password for the print server.
(0–20 characters)
Specify the interval to confirm jobs.
(1–255 seconds)
Specify the name of a NetWare print server.
(0–47 characters)
Specify the number of the printer connected to the NetWare
print server.
(0–254)
→P.405
Network Setting > Network Setting (Windows)
Details
Specifying the Printer's Frame Type
>
Default
Setting
—
—
—
5
—
0
9
821