Cannot Cut Paper; End Of Paper Feed; Borderless Printng Not Possible - Canon imagePROGRAF iPF6400SE User Manual

Cannot cut paper.

Paper could not be advanced correctly during ejection.

Cannot cut paper.

Cannot cut paper.
Cause
There are sheets left on the Ejection
Guide.
There is a foreign object by the Out-
put Tray, obstructing the Cutter Unit.
You are not using the printer under
the recommended environmental
conditions for the paper.
You are using paper that is not com-
patible with automatic cutting.
In other cases, the Cutter Unit may
be damaged.

End of paper feed.

End of paper feed.

Although an attempt was made to advance the paper manually, it reached the limit posi-
tion that can be advanced.

Borderless printng not possible.

Borderless printng not possible.

Cause
The print job received speci-
fies a type or width of paper
that is not compatible with
borderless printing.
The loaded paper is a size
not compatible with border-
less printing.
648
Cause
1.
Press the OK button and remove the paper.
2.
Load paper.
(See "Loading Rolls in the Printer.")
Lift the Top Cover and remove the foreign object.
Use the printer only where the recommended environmental conditions for the paper are met.
Note that various environmental conditions are recommended for various types of paper. For de-
tails on the recommended environmental conditions, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
1.
Specify Manual as the cutting method and use scissors or a cutting tool to cut the roll.
(See "Specifying the Cutting Method for Rolls.")
For information about paper that is compatible with automatic cutting, see the Paper Refer-
ence Guide.
(See "Displaying the Paper Reference Guide.")
2.
Press the OK button and remove the paper.
Contact your Canon dealer for assistance.
Cause
Follow these steps to change the settings of the print job to enable borderless printing.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2.
Make sure the correct printer driver for the printer is selected and try printing again.
For information on types of paper compatible with borderless printing, refer to the Paper Reference
Guide.
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The docu-
ment will be printed with a border.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Replace the paper with paper compatible for borderless printing as follows.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
2.
Replace the paper with paper compatible for borderless printing.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
For information on types of paper compatible with borderless printing, refer to the Paper Reference
Guide.
Corrective Action
(See "Clearing a Jammed Sheet, Fed Manually.")
Corrective Action
P.365
➔
P.356
➔
➔
Canceling manual advancing.
(See "Feeding Roll Paper Manually.")
Corrective Action
P.356
➔
P.370
➔
P.372
➔
P.363
➔
P.365
➔
P.614
➔
P.376
➔
P.356
Corrective Action
iPF6400SE
P.373
➔
User's Guide