Configuring The Destination In Tcp/Ip Networks - Canon iPF6300 User Manual

Network Setting
Note
• By using RemoteUI, you can also specify the object name used for AppleTalk, as well as the printer zone
name.
For details on RemoteUI, see "Using RemoteUI."
Configuring the Destination (Mac OS X)
Important
• AppleTalk is supported in Mac OS X 10.2.8–10.4.
Note
• The following procedures are based on Mac OS X 10.4. The method of configuring the destination varies
depending on the version of Mac OS X.
• The imagePROGRAF printer driver is not compatible with AppleTalk.
1.
In System Preferences, click Network to display the Network window.
2.
In Show, choose Built-in Ethernet. Next, click AppleTalk, select Make AppleTalk Active, and click Apply
now.
9
832
3.
Close the Network window and save the settings.

Configuring the Destination in TCP/IP Networks

Follow these steps to configure the destination when using the printer in a TCP/IP network.
Important
• If you use the printer in a TCP/IP network, make sure the printer's IP address is configured correctly.
(See "Configuring the IP Address Using the Printer Control Panel.")
Configuring the Destination in TCP/IP Networks
> Network Setting (Mac OS X) >
→P.811
→P.808
iPF6300