Prepare For Parts Replacement - Canon iPF6300 User Manual

Error Message >

Prepare for parts replacement.

It is almost time to replace consuma-
bles for which service is required.
Parts replacement time has passed.
It is past the recommended time to replace consumables for which
service is required.
Unknown file.
Data sent to keep the printer up to date (such
as paper information) is in the wrong format.
You have uploaded firmware for a different
model.
Calibration There is a problem with the multi-sensor.
12
The performance of a sensor inside the printer
may be impaired.
Multi-sensor error
Direct sunlight or strong lighting may be shining on the
printer and causing the sensor to malfunction.
932
The performance of a sensor inside the printer may be im-
paired.
Prepare for parts replacement.
Other Messages >
Cause
Cause
Cause
Cause
Cause
Corrective Action
If "Parts replacement time has passed." is displayed, you can continue
to use the printer for some time.
Contact your Canon dealer for assistance.
Check the print job. Turn off the printer and wait a while before
restoring power, and then resend the data.
Check the firmware version. Turn off the printer and wait a while
before restoring power, and then resend the firmware.
If the message is displayed again, contact your Canon dealer for
assistance.
Press the OK button and cancel calibration. Contact your Canon
dealer for assistance.
Take steps to ensure the printer is not used when ex-
posed to direct sunlight or strong lighting.
Contact your Canon dealer for assistance.
Corrective Action
Contact your Canon dealer for assistance.
Corrective Action
Corrective Action
Corrective Action
iPF6300