Configure the following settings as necessary, and then click the Next button.
Automatic Cutting Settings
• Depending on the paper, there are types that cannot be cut by the cutter unit, and types that speed
deterioration of the blade and cause damage to the cutter. For thick paper, hard paper, etc. do not
use the cutter unit, and instead cut the roll paper using scissors, etc. after printing. In this case,
select User Cut as the Automatic Cutting Settings.
• If borderless printing is performed on paper where the ink drying is poor, the cutter unit may
leave scratches where it touches the printed surface, or may not cut correctly. In this kind of sit-
uation, configure the amount of time to wait for the ink to dry after printing using Drying Time.
Alternatively, if the paper cannot be cut well by the cutter, set the Automatic Cutting Settings to
User Cut and cut the roll paper using scissors, etc.
• Paper where borderless printing can be performed is limited by the media type and roll paper
width. Refer to " Compatible Paper
• For custom paper where there is a need to set the Automatic Cutting Settings to User Cut, set
the Borderless Printing to Deny.
Configures the method for cutting roll paper when it is ejected after printing.
Automatic Cut :Roll paper is automatically cut by the cutter unit.
Eject Cut :When the Cut key is pressed on the printer control panel, the roll
paper is cut by the cutter unit. Select this if you do not want the printed mate-
rial to drop immediately after printing, such as to wait for the ink to dry.
User Cut :Cutting is not performed by the cutter unit. Cut the roll paper us-
ing scissors after each sheet. Select this for paper that cannot be cut by the
Specify the time that the printer waits for ink to dry, as needed.
Off :Ejects immediately after printing finishes.
30 sec./1 min./3 min./5 min./10 min./30 min./60 min. :Ejects after the
specified time has elapsed after printing finishes.
Configures whether or not to permit borderless printing.
Permit : Borderless printing is permitted.
Deny : Borderless printing is denied.
Mac OS X Software
Media Configuration Tool
Add Custom Paper