Printer Parts
>
Control Panel
DUTY
Printing Interface Setting Reports
You can print an Interface Print report indicating the current interface settings values of the printer.
Interface Print reports indicate settings values for TCP/IP, NetWare, and other settings.
Printing Interface Print reports
1.
Load the paper.
8
If using sheets, load paper A4/Letter-sized, you will need at least three sheets.
2.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (
3.
Press the OK button.
The Set./Adj. Menu is displayed.
792
4.
Press ▲ or ▼ to select Test Print, and then press the OK button.
5.
Press ▲ or ▼ to select Interface Print, and then press the OK button.
Confirming Interface Print information
The following information is included in the Interface Print report.
Canon imagePROGRAF iPFxxxx Interface Print
Firm
Boot
Printing Interface Setting Reports
>
NAME
TTL
ROLL
CUTSHEET
AFTER INSTALLATION
Counters for maintenance purposes. Needed
when service is requested.
UNIT:m2
UNIT:sq.f
UNIT:A4 Sheet
UNIT:Letter Sheet
Note
• If the Tab Selection screen is not displayed, press the Menu button.
Firmware Version
Boot ROM Version
Printer model
).
iPF6300