Cannot Cut Paper; End Of Paper Feed - Canon iPF6200 User Manual

Cannot cut paper.

There are sheets left on the Ejection Guide.
There is a foreign object by the Output Tray,
obstructing the Cutter Unit.
You are not using the printer under the recommended
environmental conditions for the paper.
You are using paper that is not compatible with
automatic cutting.
The Cutter Unit stops in the middle of cutting.
In other cases, the Cutter Unit may be damaged.
*If this message is displayed, you can resume the print job.

End of paper feed.

You are pressing the ▲ button on the Control Panel
and trying to rewind the roll to the edge.
Downloaded from ManualsPrinter.com Manuals
Cause
Cause
Corrective Action
Remove the paper.
Remove the foreign object.
Use the printer only where the recommended
environmental conditions for the paper are met.
Note that various environmental conditions are
recommended for various types of paper. For details
on the recommended environmental conditions for
paper, see Paper Reference Guide".
(→P.108)
Specify Manual as the method for cutting rolls and
cut the roll manually.
(→P.135)
For details on automatic cutting compatibility, see the
Paper Reference Guide.
(→P.108)
Move the Cutter Unit to the left, and then remove the
roll paper. If cutting is not possible using the Cutter
Unit, specify Manual as the method for cutting rolls
and cut the roll manually.
(→P.127)
(→P.135)
Contact your Canon dealer for assistance.
Corrective Action
Release the ▲ button.
Messages regarding paper
Error Message 695