Cannot Feed Paper; Cannot Cut Paper - Canon imagePROGRAF iPF6000S User Manual

Messages regarding paper

Cannot feed paper.

The sheet cannot be fed correctly.

Cannot cut paper.

There are sheets left on the Ejection Guide.
There is a foreign object by the Output Tray,
obstructing the Cutter Unit.
You are not using the printer under the recommended
environmental conditions for the paper.
You are using paper that is not compatible with
automatic cutting.
The Cutter Unit stops in the middle of cutting.
In other cases, the Cutter Unit may be damaged.
692 Error Message
Downloaded from ManualsPrinter.com Manuals
Cause
Cause
Corrective Action
Reload the sheet straight, in the correct position.
(→P.148)
Corrective Action
1.
Remove the paper.
2.
If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
1.
Remove the foreign object.
2.
If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
Use the printer only where the recommended
environmental conditions for the paper are met.
Note that various environmental conditions are
recommended for various types of paper. For details
on the recommended environmental conditions for
paper, see the Paper Reference Guide.
(→P.104)
Specify Manual as the cutting method and cut the
roll manually.
(→P.132)
For information about paper that is compatible with
automatic cutting, see the Paper Reference Guide.
(→P.104)
Move the Cutter Unit to the left and remove the
paper. If the paper cannot be cut using the Cutter
Unit, specify Manual as the roll cutting method and
cut the roll manually.
(→P.123)
(→P.132)
Contact your Canon dealer for assistance.