Cannot Feed Paper; Cannot Cut Paper - Canon iPF6400S Basic Manual

iPF6400S Basic Guide

Cannot feed paper.

Cause
Paper could not be advanced
correctly during feeding.
Paper could not be advanced
correctly during ejection.

Cannot cut paper.

Cause
There are sheets left on the
Ejection Guide.
There is a foreign object by the
Output Tray, obstructing the
Cutter Unit.
You are not using the printer
under the recommended
environmental conditions for the
paper.
You are using paper that is not
compatible with automatic cutting.
In other cases, the Cutter Unit
may be damaged.
142
Cause
1. Press the OK button.
2. Remove the paper.
(See "Clearing Jammed Roll Paper.")➔P.102
(See "Clearing a Jammed Sheet, Fed Manually.")➔P.105
3. Load the paper.
(See "Loading Rolls in the Printer.")➔P.14
(See "Loading Sheets in the Feed Slot.")➔P.21
4. If Not finished printing. Finish printing remaining jobs? is shown on the
Display Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
1. Press the OK button.
2. Remove the paper.
(See "Clearing Jammed Roll Paper.")➔P.102
(See "Clearing a Jammed Sheet, Fed Manually.")➔P.105
1. Press the OK button and remove the paper.
2. Load paper.
3. If Not finished printing. Finish printing remaining jobs? is shown on the
Display Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")➔P.14
1. Lift the Top Cover and remove the foreign object.
2. If Not finished printing. Finish printing remaining jobs? is shown on the
Display Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
Use the printer only where the recommended environmental conditions for the paper
are met. Note that various environmental conditions are recommended for various
types of paper. For details on the recommended environmental conditions, see the
Paper Reference Guide.
(See "Paper Reference Guide.")
1. Specify Manual as the cutting method and use scissors or a cutting tool to cut the
roll.
(See "Specifying the Cutting Method for Rolls.")➔User's Guide
For information about paper that is compatible with automatic cutting, see the
Paper Reference Guide.
(See "Paper Reference Guide.")
2. Press the OK button and remove the paper.
Contact your Canon dealer for assistance.
Corrective Action
1. Remove the paper and press the OK button.
2. Reload the paper.
(See "Loading Sheets in the Feed Slot.")➔P.21
(See "Loading Rolls in the Printer.")➔P.14
Corrective Action
Corrective Action