Printing On Non-Standard Paper Sizes (Mac Os X) - Canon iPF6300 User Manual

Enhanced Printing Options
10.
Select mm in Units.
11.
Enter 430 (16.9 in) in both Width and Height.
12.
Click Add to register 430 mm Square.
13.
Click OK to close the Paper Size Options dialog box.
14.
Click Manual in the
3
15.
A
In the
16.
Confirm the print settings and print as desired.

Printing on Non-Standard Paper Sizes (Mac OS X)

This section describes how to register and print Custom Page Sizes (Mac OS X 10.3.9-10.5)/ Custom Paper Sizes
(Mac OS X 10.6) based on the following example. Here, you will register a non-standard paper size named 430*430 in
Custom Page Sizes (Mac OS X 10.3.9-10.5)/ Custom Paper Sizes (Mac OS X 10.6).
• Document: Any Type
• Page Size: A square sheet (430 × 430 mm [16.9 × 16.9 in])
• Paper: Sheets
• Media Type: Any type
• Paper Size: A square sheet (430 × 430 mm [16.9 × 16.9 in])
Note
• The following procedures are based on Mac OS X 10.5. The method of setting up non-standard paper
sizes varies depending on the version of Mac OS X.
1.
Create the document in the application.
116
2.
Load the square paper (430 × 430 mm [16.9 × 16.9 in]) in the printer.
Printing on Non-Standard Paper Sizes (Mac OS X)
> Printing banners or at other non-standard sizes
Note
• If you select the Fix the Ratio of the Width to Height check box, after you enter a value in
either Width or Height, the other value will be automatically applied based on the original aspect
ratio.
L
Paper Source list.
Page Size list, click the size you added, 430 mm Square.
Note
• For tips on confirming print settings, see " Confirming Print Settings (Windows)
>
→P.188
"
iPF6300