16 TROUBLESHOOTING
16.4 Troubleshooting for Board and Driver
16.4.1 Board WDT error
Is the board installed properly?
Does the board operate on other personal computer?
16.4.2 Driver WDT error
Has the error occurred due to the system overload
*1
temporarily?
Is the same error occurred repeatedly?
(Is the system overloaded constantly?)
*1: A driver WDT error may occur when the system is overloaded temporarily due to the following factors.
•
Windows
R
start processing at the personal computer startup
•
Operation of a device driver such as a graphic board
•
Operation of other software applications
16 - 14
When the board WDT error occurred, check the following items.
Item
If any of the above corrective actions do not help, refer to Section 16.7.
When the driver WDT error occurred, check the following items.
Item
If any of the above corrective actions do not help, refer to Section 16.7.
Corrective action
• Check the board installation status.
• After formatting the HD, install the operating system
again.
• Repair or replace the personal computer.
Corrective action
• Reset the board. (Refer to Section 8.2.7 "Operating the
Memory I/O test screen")
• Restart the personal computer.
• Remove the factor of system overload.
• Disable the driver WDT function or increase the driver
WDT monitoring time. (Refer to Section 8.2.5 (2) "Other
settings screen")
MELSEC
16 - 14