To configure a Malicious Signature:
1.
Open the Malicious Signature table (Setup menu > Signaling & Media tab > SBC
folder > Malicious Signature).
2.
Click New; the following dialog box appears:
Figure 36-1: Malicious Signature Table - Add Dialog Box
3.
Configure a Malicious Signature according to the parameters described in the table
below.
4.
Click Apply.
Table 36-1: Malicious Signature Table Parameter Descriptions
Parameter
Index
[ConditionTable_Index]
Name
name
[MaliciousSignatureDB_Name]
Pattern
pattern
[MaliciousSignatureDB_Pattern]
User's Manual
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Defines an name to easily identify the row.
The valid value is a string of up to 30 characters.
Note: Each row must be configured with a unique name.
Defines the signature pattern.
The valid value is a string of up to 60 characters.
Note: The parameter is mandatory.
702
Mediant 1000B Gateway & E-SBC
Description
Document #: LTRT-27045